Set / Display Station IP address

Input

[ESP103]IP=<IP> MSK=<IP> GW=<IP> DNS=<IP> json=<no> pwd=<admin/user password>

• json=no the output format
  can be in JSON or plain text

• pwd= the admin password if authentication is enabled

• IP

• if IP is empty, it will display defined IP

• if IP is not empty, it will set the IP

• MSK

  • if MSK is empty, it will display defined Network Mask
  • if MSK is not empty, it will set the Network Mask

• GW

  • if GW is empty, it will display defined Gateway
  • if GW is not empty, it will set the Gateway

• DNS

  • if DNS is empty, it will display defined DNS
  • if DNS is not empty, it will set the DNS

Output

• In json format

{
 "cmd": "103",
 "status": "ok",
 "data": {
  "ip": "192.168.0.1",
  "gw": "192.168.0.1",
  "msk": "255.255.255.0",
  "dns": "192.168.0.1"
 }
}

• cmd Id of requested command, should be 103
• status status of command, should be ok
• data content of response, here the IP, GW, MSK and DNS