Set / Display Ethernet Station IP address

Input

[ESP117]IP=<IP> MSK=<IP> GW=<IP> DNS=<IP> json=<no> pwd=<admin/user password>

  • json=no the output format
    can be in JSON or plain text

  • pwd= the admin password if authentication is enabled

  • IP

  • if IP is empty, it will display defined IP
  • if IP is not empty, it will set the IP

  • MSK

    • if MSK is empty, it will display defined Network Mask
    • if MSK is not empty, it will set the Network Mask
  • GW

    • if GW is empty, it will display defined Gateway
    • if GW is not empty, it will set the Gateway
  • DNS

    • if DNS is empty, it will display defined DNS
    • if DNS is not empty, it will set the DNS

Output

  • In json format
{
 "cmd": "117",
 "status": "ok",
 "data": {
  "ip": "192.168.0.1",
  "gw": "192.168.0.1",
  "msk": "255.255.255.0",
  "dns": "192.168.0.1"
 }
}
  • cmd Id of requested command, should be 117
  • status status of command, should be ok
  • data content of response, here the IP, GW, MSK and DNS