Get ESP3D current status

Input

[ESP420] json=<no> pwd=<admin password>

  • json=no the output format can be in JSON or plain text

  • pwd= the admin password if authentication is enabled

Output

{
   "cmd":"420",
   "status":"ok",
   "data":[
      {"id":"chip id","value":"11111"},
      {"id":"CPU Freq","value":"240Mhz"},
      {"id":"CPU Temp","value":"72.8C"},
      {"id":"free mem","value":"232.43 KB"},
      {"id":"SDK","value":"v4.4.4"},
      {"id":"flash size","value":"4.00 MB"},
      {"id":"FS type","value":"LittleFS"},
      {"id":"FS usage","value":"112.00 KB/128.00 KB"},
      {"id":"baud","value":"115200"},
      {"id":"sleep mode","value":"none"},
      {"id":"wifi","value":"ON"},
      {"id":"hostname","value":"esp3d"},
      {"id":"wifi mode","value":"ap"},
      {"id":"mac","value":"D4:D4:D4:D4:D4:D4"},
      {"id":"SSID","value":"ESP3D"},
      {"id":"visible","value":"yes"},
      {"id":"authentication","value":"WPA2"},
      {"id":"DHCP Server","value":"ON"},
      {"id":"ip","value":"192.168.0.1"},
      {"id":"gw","value":"192.168.0.1"},
      {"id":"msk","value":"255.255.255.0"},
      {"id":"clients","value":"0"},{"id":"sta","value":"OFF"},
      {"id":"mac","value":"D4:D4:D4:D4:D4:D4"},
      {"id":"ntp","value":"OFF"},
      {"id":"serial","value":"ON"},
      {"id":"notification","value":"ON (none)"},
      {"id":"targetfw","value":"unknown"},
      {"id":"FW ver","value":"3.0.0.a225"},
      {"id":"FW arch","value":"ESP32"}]}
  • cmd Id of requested command, should be 420
  • status status of command, should be ok
  • data content of response, where each status is a key/value pair of id/value

  • plain text format

Configuration:
chip id: 1010100
CPU Freq: 240Mhz
CPU Temp: 72.8C
free mem: 232.47 KB
SDK: v4.4.4
flash size: 4.00 MB
FS type: LittleFS
FS usage: 112.00 KB/128.00 KB
baud: 115200
sleep mode: none
wifi: ON
hostname: esp3d
wifi mode: ap
mac: D4:D4:D4:D4:D4:D4
SSID: ESP3D
visible: yes
authentication: WPA2
DHCP Server: ON
ip: 192.168.0.1
gw: 192.168.0.1
msk: 255.255.255.0
clients: 0
sta: OFF
mac: D4:D4:D4:D4:D4:D4
ntp: OFF
serial: ON
notification: ON (none)
targetfw: unknown
FW ver: 3.0.0.a225
FW arch: ESP32
ok