Subsections of Hardware
ESP8285 boards
Subsections of ESP8285 boards
blkboxme
From blkbox
Specs
- ESP8285 with 1MB flash memory, ceramic antenna
Because flash is only 1MB, OTA/Web Update are not possible
Itead8285
From Itead, also named PSF-A85
Specs
- ESP8285 with 1MB flash memory, ipex antenna connector
Because flash is only 1MB, OTA/Web Update are not possible
ESP8266 boards
- ESP01 512K
ESP01 512K Blue
- ESP01 1M Generic
ESP01 1M Generic Black
- ESP01S 1M
ESP01S 1M
- ESP07
ESP07
- ESP12 e/f
ESP12 e/f
- Bigtreetech Cloud
Bigtreetech Cloud
- FYSETC-SD-WIFI
FYSETC-SD-WIFI
- Bigtreetech WiFi module
Bigtreetech WiFi module
- Diymore
Diymore
- Wemos D1 mini
Wemos D1 mini
- Wemos D1 mini Pro
Wemos D1 mini Pro
- MKS WiFi Module V1.0 (8 pins)
MKS WiFi Module V1.0 (8 pins)
- MKS WiFi Module V1.1 (16 pins)
MKS WiFi Module V1.1 (16 pins)
- Nodemcu V0.8
Nodemcu V0.8
- Nodemcu V1.0
Nodemcu V1.0
- SOnOff
SOnOff
Subsections of ESP8266 boards
ESP01 512K
Specs
- ESP8266 in ESP01 format with 512KB flash memory, ceramic antenna
Because flash is only 512KB, the board is not supported
ESP01 1M Generic
Specs
- ESP8266 in ESP01 format (8 pins) with 1MB flash memory, ceramic antenna
Because flash is only 1MB, OTA/Web Update are not possible
Pinout
1 | 2 | 3 | 4 |
---|---|---|---|
GND | IO02 | IO0 | RXD |
TXD | CH_PD | RESET | VCC |
ESP01S 1M
Specs
- ESP8266 in ESP01 format (8 pins, VCC/CH_DP internally bridged ) with 1MB flash memory, ceramic antenna
Because flash is only 1MB, OTA/Web Update are not possible
Pinout
1 | 2 | 3 | 4 |
---|---|---|---|
GND | IO02 | IO0 | RXD |
TXD | CH_PD | RESET | VCC |
ESP07
Specs
- ESP8266 in ESP7 format with 4MB flash memory, ceramic antenna/ipex connector
Pinout
1 | 2 |
---|---|
RESET | TX |
ADC | RX |
CH_PD | IO5 |
IO16 | IO4 |
IO14 | IO0 |
IO12 | IO2 |
IO13 | IO15 |
3.3V | GND |
ESP12 e/f
Specs
- ESP8266 in ESP12 format with 4MB flash memory, ceramic antenna, and voltage regulator
Pinout
1 | 2 |
---|---|
RST | TX |
ADC | RX |
CH_PD | IO5 |
IO16 | IO4 |
IO14 | IO0 |
IO12 | IO2 |
IO13 | IO15 |
VCC | GND |
Bigtreetech Cloud
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Because there is no serial connection to printer and the sd connection is based on this project: https://github.com/ardyesp/ESPWebDAV which is a not reliable hack, the boards is not supported
FYSETC-SD-WIFI
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Because there is no serial connection to printer and the sd connection is based on this project: https://github.com/ardyesp/ESPWebDAV which is a not reliable hack, the boards is not supported
Bigtreetech WiFi module
Specs
- ESP8266 in ESP12 format with 4MB flash memory, ceramic antenna, 16 pins
Pinout
1 | 2 |
---|---|
RST | TX |
ADC | RX |
EN | IO5 |
IO16 | IO4 |
SCK(IO14) | IO0 |
MISO(IO12) | IO2 |
MOSI(IO13) | IO15 |
3.3V | GND |
Diymore
Specs
- ESP8266 with 4MB flash memory, ceramic antenna/ipex connector
From DM
Wemos D1 mini
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Pinout
1 | 2 |
---|---|
RESET | TX |
ADC | RX |
IO16 | IO5 |
IO14 | IO4 |
IO12 | IO0 |
IO13 | IO2 |
IO15 | GND |
3.3V | 5V |
Wemos D1 mini Pro
Specs
- ESP8266 with 16MB flash memory, ceramic antenna/ipx connector
Pinout
1 | 2 |
---|---|
RESET | TX |
ADC | RX |
IO16 | IO5 |
IO14 | IO4 |
IO12 | IO0 |
IO13 | IO2 |
IO15 | GND |
3.3V | 5V |
MKS WiFi Module V1.0 (8 pins)
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Pinout
1 | 2 | 3 | 4 |
---|---|---|---|
VCC | GND | IO0 | IO4 |
NC | TX | RX | RST |
MKS file upload is not supported, use ESP3D 3.0 or later for MKS protocol support
MKS WiFi Module V1.1 (16 pins)
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Pinout
1 | 2 |
---|---|
RESET | TX |
ADC | RX |
CH_PD | IO5 |
IO16 | IO4 |
IO14 | IO0 |
IO12 | IO2 |
IO13 | IO15 |
3.3V | GND |
MKS file upload is not supported, use ESP3D 3.0 or later for MKS protocol support
Nodemcu V0.8
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Pinout
1 | 2 |
---|---|
ADC | IO16 |
RSV | IO5 |
RSV | IO4 |
RSV | IO0 |
RSV | IO2 |
RSV | 3.3V |
RSV | GND |
GND | IO14 |
3.3V | IO12 |
GND | IO13 |
3.3V | IO15 |
EN | RX |
RST | TX |
GND | GND |
5V | 3.3V |
Nodemcu V1.0
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
Pinout
1 | 2 |
---|---|
ADC | IO16 |
RSV | IO5 |
RSV | IO4 |
IO10 | IO0 |
IO9 | IO2 |
MOSI | 3.3V |
CS | GND |
MISO | IO14 |
CLK | IO12 |
GND | IO13 |
3.3V | IO15 |
EN | RX |
RST | TX |
GND | GND |
5V | 3.3V |
SOnOff
Specs
- ESP8266 with 4MB flash memory, ceramic antenna
ESP32 boards
- Dev Kit V1
Dev Kit V1
- Dev Kit C V4
Dev Kit C V4
- Heltec Dev board
Heltec Dev board
Subsections of ESP32 boards
Dev Kit V1
Specs
- ESP32 with 4MB flash memory, ceramic antenna, 30 pins
Dev Kit C V4
Specs
- ESP32 with 4MB flash memory, ceramic antenna/ipex connector, 38 pins
Heltec Dev board
Specs
- ESP32 with 4MB flash memory, ceramic antenna, I2C oled screen (SSD1306 128X64, 0x3C, SDA=IO4, SCL=IO15)
The screen need to be reset at start using IO16 (Low then High)