[ESP103]

Set / Display Station IP address

Input

[ESP103]IP=<IP> MSK=<IP> GW=<IP> DNS=<IP> json=<no> pwd=<admin/user password>

json=no the output format
can be in JSON or plain text
pwd= the admin password if authentication is enabled
IP
- if IP is empty, it will display defined IP
- if IP is not empty, it will set the IP
MSK
- if MSK is empty, it will display defined Network Mask
- if MSK is not empty, it will set the Network Mask
GW
- if GW is empty, it will display defined Gateway
- if GW is not empty, it will set the Gateway
DNS
- if DNS is empty, it will display defined DNS
- if DNS is not empty, it will set the DNS

{
 "cmd": "103",
 "status": "ok",
 "data": {
  "ip": "192.168.0.1",
  "gw": "192.168.0.1",
  "msk": "255.255.255.0",
  "dns": "192.168.0.1"
 }
}