[ESP201]

Get/Set pin value

Input

[ESP201]P=<pin> V=<value> <json=YES/NO> <PULLUP=YES> <RAW=YES> <ANALOG=NO> <ANALOG_RANGE=255> pwd=<admin password> Range can be 255 / 1024 / 2047 / 4095 / 8191

  • json=no the output format can be in JSON or plain text

  • pwd= the admin password if authentication is enabled

    • P

      • if P is not empty, it will use the pin value

    • V

      • if V is empty, it will display current pin value
      • if V is not empty, it will set the pin value

  • RAW

    • if RAW is present, it will set the pin mode

  • PULLUP

    • if PULLUP is present, it will set the pullup pin mode

  • ANALOG

    • if ANALOG is present, it will set the pin ANALOG

  • ANALOG_RANGE

    • if ANALOG_RANGE is not empty, it will set the ANALOG_RANGE

Output

  • In json format
{
   "cmd":"201",
   "status":"ok",
   "data":"1"
}
  • cmd Id of requested command, should be 201
  • status status of command, should be ok
  • data content of response, here the pin value is 1 or High