Email Notification

Email Notification is using SMTP and HTTPS, so you need to collect the following information fof your email supplier

  • smtp server address and https port
  • smtp username/ID
  • smtp password

ESP3D use the parameters as follow:

  • token 1 = ID to login to your email supplier
  • token 2 = Password to login to your email supplier
  • token settings = the_recipient email#smtp_server:port where # and : are fields separators.

For example: luc@gmail.com#smtp.gmail.com:465

1 -Save the token 1, token 2 and token settings in ESP3D, and set EMAIL as notification supplier
[ESP610]type=EMAIL T1=luc@gmail.com T2=mypassword TS=luc@gmail.com#smtp.gmail.com:465

2 - Type [ESP610] to verify (T1 and T2 won’t be displayed)

3 - Try to send message:
[ESP600]Hi there, test from ESP3D

4 - Important : if you are using Gmail there is an additional step, as by default https access is disabled.
go to : https://myaccount.google.com/lesssecureapps and allow less secure applications to connect gmail enabling http access gmail enabling http access