[ESP401]
Set ESP3D settings
Input
[ESP401]<P=id> <T=type> <V=value> json=<no> pwd=<admin password>
-
json=no the output format can be in JSON or plain text
-
pwd= the admin password if authentication is enabled
-
P
- P is the id or position in EEPROM of the setting to change
-
T * T is the type of the setting to change * T can be: - S: for string - I: for integer - B: for Byte - A: for IP address / Mask - F: for float (only grblHAL) - M: for bits mask (only grblHAL) - X: for exclusive bitsfield (only grblHAL)
-
V * V is the value to set if value has space add
\`` in front of space to not be seen as separator e.g:
[ESP401]P=1 T=S V=My\ SSID json`
Output
- In json format
{
"cmd":"401",
"status":"ok",
"data":"1"
}
cmd
Id of requested command, should be401
status
status of command, should beok
data
content of response, here the id/position of the setting changed