Sync / Set / Get current time

Input

[ESP140]<SYNC> <srv1=XXXXX> <srv2=XXXXX> <srv3=XXXXX> <tzone=+HH:SS> <ntp=YES/NO> <time=YYYY-MM-DDTHH:mm:ss> NOW json=<no> pwd=<admin password>

• json=no the output format can be in JSON or plain text

• pwd= the admin password if authentication is enabled

• srv1 / srv2 / srv3

  • if srv1 / srv2 / srv3 are empty, it will display current NTP servers
  • if srv1 / srv2 / srv3 are not empty, it will set the NTP servers

• tzone

  • if tzone is empty, it will display current time zone
  • if tzone is not empty, it will set the time zone

• time

  • if time is empty, it will display current time
  • if time is not empty, it will set the time

• ntp

  • if ntp is empty, it will display current NTP state
  • if ntp is not empty, it will set the NTP state

• SYNC

  • if SYNC, it will restart NTP service to sync time

• NOW

  • if NOW, it will display current time in ISO 8601 format with time zone

Output

• In json format

{
   "cmd":"140",
   "status":"ok",
   "data":"2020-01-01T00:00:00 (+08:00)"
}

• cmd Id of requested command, should be 140
• status status of command, should be ok
• data content of response, here the time