[ESP170]
Get /Set Camera command value / list all values in JSON/plain text
Input
[ESP170]<label=value> <json=no> pwd=<admin password>
-
json=no the output format can be in JSON or plain text
-
pwd= the admin password if authentication is enabled
-
label
- if label is empty, it will display current value
- if label is not empty, it will set the value
label can be: light/framesize/quality/contrast/brightness/saturation/gainceiling/colorbar/awb/agc/aec/hmirror/vflip/awb_gain/agc_gain/aec_value/aec2/cw/bpc/wpc/raw_gma/lenc/special_effect/wb_mode/ae_level
value depend on label
Output
- In json format
{
"cmd":"170",
"status":"ok",
"data":"ok"
}
cmd
Id of requested command, should be170
status
status of command, should beok
|data
content of response, hereok
Framesize
Framesize can be:
Value | Description | resolution |
---|---|---|
0 | FRAMESIZE_96X96 | 96x96 |
1 | FRAMESIZE_QQVGA | 160x120 |
2 | FRAMESIZE_QCIF | 176x144 |
3 | FRAMESIZE_HQVGA | 240x176 |
4 | FRAMESIZE_240X240 | 240x240 |
5 | FRAMESIZE_QVGA | 320x240 |
6 | FRAMESIZE_CIF | 400x296 |
7 | FRAMESIZE_HVGA | 480x320 |
8 | FRAMESIZE_VGA | 640x480 |
9 | FRAMESIZE_SVGA | 800x600 |
10 | FRAMESIZE_XGA | 1024x768 |
11 | FRAMESIZE_HD | 1280x720 |
12 | FRAMESIZE_SXGA | 1280x1024 |
13 | FRAMESIZE_UXGA | 1600x1200 |
14 | FRAMESIZE_FHD | 1920x1080 |
15 | FRAMESIZE_P_HD | 720x1280 |
16 | FRAMESIZE_P_3MP | 864x1536 |
17 | FRAMESIZE_QXGA | 2048x1536 |
18 | FRAMESIZE_QHD | 2560x1440 |
19 | FRAMESIZE_WQXGA | 2560x1600 |
20 | FRAMESIZE_P_FHD | 1080x1920 |
21 | FRAMESIZE_QSXGA | 2560x1920 |