[ESP930]

Set Serial Bridge state which can be ON, OFF, CLOSE

Input

[ESP930]<state> json=<no> pwd=<admin password>

  • json=no the output format

  • state

    • if state is empty, it will display current state
    • if state is not empty, it will set the state currently only these states are supported:
      • ENABLE
      • DISABLE
      • CLOSE

  • pwd= the admin password if authentication is enabled

Output

  • In json format
{
   "cmd":"930",
   "status":"ok",
   "data":"ENABLED"
}
  • cmd Id of requested command, should be 930
  • status status of command, should be ok
  • data content of response, here the current state
  • plain text format
ENABLED