[ESP999]
Set quiet boot if strapping pin is High, can only be done once and cannot be reverted
Note
This command is only available if ESP32-S3, ESP32-C3 or ESP32-S2 is used
Input
[ESP999]QUIETBOOT json=<no> pwd=<admin password>
-
json=no the output format
-
pwd= the admin password if authentication is enabled
-
QUIETBOOT
- if QUIETBOOT is present, it will set the quiet boot flag
Output
- In json format
{
"cmd":"999",
"status":"ok",
"data":"ok"
}
cmd
Id of requested command, should be999
status
status of command, should beok
data
content of response, hereok
when quiet boot is set
- plain text format
ok