[ESP900]

Get state / Set Serial Communication

Input

[ESP900]<state> json=<no> pwd=<admin password>

• json=no the output format can be in JSON or plain text

• state

  • if state is empty, it will display current state
  • if state is not empty, it will set the state currently only these states are supported:
    • ENABLE
    • DISABLE

• pwd=<admin password> the admin password if authentication is enabled

Output

• In json format

{
   "cmd":"900",
   "status":"ok",
   "data":"ENABLED"
}

• cmd Id of requested command, should be 900
• status status of command, should be ok
• data content of response, here the current state

-Text

ENABLED