Skip to content
ESP3D Logo ESP3D Ecosystem

1.47' Waveshare ESP32-S3-Touch-LCD-1.47

ESP3D-X support

Section titled “ESP3D-X support”
Board folderboards/ESP32_S3_TOUCH_LCD_1_47
CMake optionESP32_S3_TOUCH_LCD_1_47
Status✅ Supported (basic small UI: read-only dashboard)
Factory app— No Factory recovery app yet.
InputsTouch + BOOT button (switches dashboard pages)

Build variants

Section titled “Build variants”
VariantFlashCNC connectionTarget firmware
16mb_wifi_fluidnc16 MBUSB + WiFi remote (WebUI)FluidNC

See Installation to build and flash a variant.

Hardware

Section titled “Hardware”

image

  • Waveshare
  • ESP32-S3R8: 16MB flash, 8MB octal PSRAM
  • 1.47-inch 172x320 TFT display - JD9853 (SPI)
  • Capacitive touch panel - AXS5106L (I2C)
  • Micro-SD card slot (SDMMC, 4-bit)
  • Native USB (USB CDC device to a PC)
  • Small UI tier: a read-only two-page dashboard (no jog), BOOT button switches pages

Pins

Section titled “Pins”
PinUsage
GPIO 0BOOT / UI page button
GPIO 13SD_D2
GPIO 14SD_D3
GPIO 15SD_CMD
GPIO 16SD_CLK
GPIO 17SD_D0
GPIO 18SD_D1
GPIO 21LCD_CS
GPIO 38LCD_SCLK
GPIO 39LCD_MOSI
GPIO 40LCD_RST
GPIO 41TOUCH_SCL
GPIO 42TOUCH_SDA
GPIO 43UART_TX
GPIO 44UART_RX
GPIO 45LCD_DC
GPIO 46LCD_BL
GPIO 47TOUCH_RST
GPIO 48TOUCH_INT