Conventions
Section titled “Conventions”Add space to separate parameters
Display command list
Section titled “Display command list”[ESP]
Set/Get STA SSID
Section titled “Set/Get STA SSID”“ESP100`
Set STA Password
Section titled “Set STA Password”[ESP101](Password)
Set/Get STA IP mode (DHCP/STATIC)
Section titled “Set/Get STA IP mode (DHCP/STATIC)”[ESP102](mode)
Set/Get STA IP/Mask/GW
Section titled “Set/Get STA IP/Mask/GW”[ESP103]IP=(IP) MSK=(IP) GW=(IP)
Set/Get AP SSID
Section titled “Set/Get AP SSID”[ESP105](SSID)
Change AP Password
Section titled “Change AP Password”[ESP106](Password)
Set/Get AP IP
Section titled “Set/Get AP IP”[ESP107](IP)
Set/Get AP channel
Section titled “Set/Get AP channel”[ESP108](channel)
Set/Get radio state which can be STA, AP, OFF
Section titled “Set/Get radio state which can be STA, AP, OFF”[ESP110](state)
Get current IP
Section titled “Get current IP”[ESP111]
Get/Set hostname
Section titled “Get/Set hostname”[ESP112](Hostname)
Get/Set HTTP state which can be ON, OFF
Section titled “Get/Set HTTP state which can be ON, OFF”[ESP120](state)
Get/Set HTTP port
Section titled “Get/Set HTTP port”[ESP121](port)
Get SD Card Status
Section titled “Get SD Card Status”[ESP200]
Get full EEPROM settings content
Section titled “Get full EEPROM settings content”Note: it does not give any passwords
[ESP400]
Set EEPROM setting
Section titled “Set EEPROM setting”Using position in EEPROM, type: B(byte), I(integer/long), S(string), A(IP address / mask)
[ESP401]P=(position) T=(type) V=(value)
Description: Positions:HOSTNAME_ENTRY "ESP_HOSTNAME"STA_SSID_ENTRY "STA_SSID"STA_PWD_ENTRY "STA_PWD"STA_IP_ENTRY "STA_IP"STA_GW_ENTRY "STA_GW"STA_MK_ENTRY "STA_MK"ESP_RADIO_MODE "WIFI_MODE"AP_SSID_ENTRY "AP_SSID"AP_PWD_ENTRY "AP_PWD"AP_IP_ENTRY "AP_IP"AP_CHANNEL_ENTRY "AP_CHANNEL"HTTP_ENABLE_ENTRY "HTTP_ON"HTTP_PORT_ENTRY "HTTP_PORT"TELNET_ENABLE_ENTRY "TELNET_ON"TELNET_PORT_ENTRY "TELNET_PORT"STA_IP_MODE_ENTRY "STA_IP_MODE"Get available AP list (limited to 30)
Section titled “Get available AP list (limited to 30)”Output is JSON or plain text according parameter
[ESP410](plain)
Get current settings of ESP3D
Section titled “Get current settings of ESP3D”Output is plain text
[ESP420]
Set ESP State
Section titled “Set ESP State”cmd is RESTART / RESET
[ESP444](cmd)
Change admin password
Section titled “Change admin password”[ESP550](password)
Change user password
Section titled “Change user password”[ESP555](password)
Format ESP Filesystem
Section titled “Format ESP Filesystem”[ESP710]FORMAT
FW Informations
Section titled “FW Informations”[ESP800](plain)