Skip to content
ESP3D Logo ESP3D Ecosystem

[ESP107]

Set / Display Access point IP value

Input

Section titled “Input”

[ESP107](IP) json=(no) pwd=(admin/user password)

  • json=no the output format can be in JSON or plain text

  • pwd=(admin password) the admin password if authentication is enabled

  • IP

    • if IP is empty, it will display defined IP
    • if IP is not empty, it will set the IP

Output

Section titled “Output”
  • In json format
{
   "cmd":"107",
   "status":"ok",
   "data":"192.168.0.1"
}
  • cmd Id of requested command, should be 107
  • status status of command, should be ok
  • data content of response, here the IP