[ESP191]

Get/Set WebDav port

Input

[ESP191](port) json=(no) pwd=(admin password)

• json=no the output format can be in JSON or plain text

• pwd=(admin password) the admin password if authentication is enabled

  • port
    • if port is empty, it will display current port
    • if port is not empty, it will set the port

Output

• In json format

{
   "cmd":"191",
   "status":"ok",
   "data":"80"
}

• cmd Id of requested command, should be 191
• status status of command, should be ok
• data content of response, here the port